# Send automatic follow-ups

Set up one automatic follow-up email or text for when a customer doesn't reply to their sales rep.

Audience: dealer-managers
Availability: available
Canonical source: https://rooftoprv.com/docs/send-automatic-follow-ups

When a sales rep emails or texts a customer from ROOFTOP and the customer doesn't reply, ROOFTOP can send one follow-up for the rep. This guide covers setup. Reps change or stop each follow-up from the conversation. See [Manage a scheduled follow-up](https://rooftoprv.com/docs/manage-a-scheduled-follow-up).

## Before you start

- To set up follow-ups, you need the **Manage automation config** permission.
- The **Admin** menu also needs **View team**. Without it, open the same page from **Marketing** > **Campaigns** > **Staff notifications**.
- To open **Marketing** > **Campaigns** > **Settings**, you need **View email programs**. The same permission lets you review the current email rule without changing it.
- To change a rep's follow-up setting, you need the **View team** and **Assign roles** permissions.

## Change customer notifications

> **Warning:** Turning this setting off permanently cancels queued CRM no-response follow-ups. Turning it on later does not bring them back. Notifications already in progress may finish.

> **Warning:** Turning customer notifications on allows eligible automatic customer emails and texts to send when their other settings permit them.

You can also find the existing **Customer notifications** setting under **Marketing** > **Campaigns** > **Settings**. It controls supported automatic customer emails and text messages. Other customer email systems have their own controls. Each message's settings and recipient rules still apply.

To turn customer notifications off:

1. Go to **Marketing** > **Campaigns** > **Settings**.
2. Under **Customer notifications**, select **Turn off**.
3. Select **Turn off notifications** to confirm.
   The setting shows **Off for this site**.

To allow eligible customer automations again:

1. Select **Turn on**.
2. Select **Turn on notifications**.
   This does not turn on **Enable automations** or restore canceled follow-ups. Individual message settings don't change.

If customer notifications have never been enabled, this setting is off.

## Check your current email settings

1. Go to **Marketing** > **Campaigns** > **Messages**.
2. Select **Follow up after no response**.
3. Read **Default follow-up settings**.
   It shows the current status and the wait after the rep's message.
4. Read **Default email text**.
   When the rule is configured, it shows the saved text or built-in message, with personal fields still unfilled. Long messages may be shortened in this view.

| Status | What it means |
|---|---|
| **Not configured** | Your site has not saved this follow-up rule |
| **Off by default** | The rule, **Enable automations**, or **Customer notifications** is off |
| **Dry run** | The rule is in test mode and does not send customer email |
| **On by default** | Describes the site's settings. The rep's preference and customer checks still apply |

If you have the **Manage automation config** permission, select **Open Automation settings** to change the rule. Changes to the default message and wait apply to newly scheduled follow-ups. Already scheduled follow-ups keep their saved message and timing unless you edit or reschedule them.

## Turn on follow-ups in test mode

In test mode, reps see scheduled follow-ups in their conversations, but nothing is sent to customers.

> **Warning:** **Test mode** shows on, but it isn't always saved. Turn it off and on again before you save, as step 7 says. If you skip that step, follow-ups can go to customers for real.

1. Go to **Admin** > **Settings** > **Automation**.
2. Turn on **Enable automations**.
3. Turn on **Customer notifications**.
   Follow-ups don't send while either is off. **Customer notifications** also controls other automatic customer messages.
4. Under **CRM**, select **Follow up after no response**.
   Its settings open below it.
5. In **Delay (hours)**, enter how long to wait after the rep's message.
   The default is 48 hours. You can enter 0.1 to 720. For example, 0.5 is 30 minutes.
6. Optional: enter your own messages in **Email follow-up** and **Text message follow-up**.
7. Turn **Test mode** off, then on again.
   This saves test mode with your other settings.
8. Turn on the switch next to **Follow up after no response**.
9. Select **Save changes** at the top of the page.
10. To check, open **Marketing** > **Campaigns** > **Messages** > **Follow up after no response**.
    Confirm it shows **Dry run**.

Follow-ups are scheduled only for messages reps send after you save. When a test follow-up comes due, it disappears from the conversation and nothing is sent.

Each time you change this rule while you're still testing, turn **Test mode** off and on again before you select **Save changes**.

## Write the follow-up messages

If a variable has no value and no fallback, ROOFTOP doesn't schedule that follow-up. A misspelled variable never has a value, so it stops every follow-up until you fix it.

1. Enter your message in **Email follow-up** or **Text message follow-up**.
   Leave a box empty to use the default.
2. To add customer or rep details, use the variables under **Available variables**.
   Select a variable to copy it.
3. Add a fallback after `||` for when a detail is missing, such as `{{rep.phone || the dealership}}`.
4. Check **Email preview** and **Text message preview** before you save.

The default greets the customer by first name and follows up on the rep's last message. It asks the customer to reply or call the rep. It's signed with the rep's first name and the dealership name. The email follow-up keeps the subject of the rep's original email.

## Start sending follow-ups to customers

> **Warning:** After you turn off test mode and save, ROOFTOP sends real follow-up emails and text messages to customers.

1. Go to **Admin** > **Settings** > **Automation**.
2. Select **Follow up after no response**.
3. Turn off **Test mode**.
4. Select **Save changes**.

Follow-ups scheduled while test mode was on never send. Only messages reps send after you save get a real follow-up.

## Choose which reps send follow-ups

> **Warning:** Choosing **Don't send follow-ups** cancels the rep's scheduled follow-ups right away. They don't come back if you change the setting later.

1. Go to **Admin** > **Organization** > **Team**.
2. Select the rep's name.
3. Select the **Leads** tab.
4. Under **Automatic follow-ups**, choose a **Follow-up setting**:
   - **Use dealership setting** sends follow-ups when the dealership's rule is on.
   - **Send follow-ups** currently works the same as **Use dealership setting**.
   - **Don't send follow-ups** stops follow-ups for this rep.
5. Select **Save changes**.

The **Sales reps** box in the rule's settings shows how many reps use each option.

## What happens next

- Follow-ups start only from emails and texts sent from ROOFTOP. A text sent outside ROOFTOP doesn't start one.
- The follow-up uses the same channel and sender as the rep's message. An email follow-up replies in the same email thread to the same recipients. A text follow-up goes from the same phone line to the same number.
- Each customer has at most one waiting follow-up. Any new email, text, call, or reply on the contact cancels it. A new rep message starts a fresh one.
- The text is set when the rep sends their message. Later changes to your messages don't affect follow-ups already scheduled.
- Text follow-ups that come due during quiet hours wait until quiet hours end. Quiet hours are 9pm to 8am in the location's local time unless you change **Quiet hours start** and **Quiet hours end**. Email isn't affected.
- Turning off **Enable automations**, **Customer notifications**, or **Follow up after no response** cancels scheduled follow-ups. So does merging two contacts. Turning the setting back on, or undoing the merge, does not restore them. Notifications already in progress may finish.

## Troubleshooting

**No follow-up appeared after a rep sent a message**
ROOFTOP schedules a follow-up only when all of these are true:

- **Enable automations**, **Customer notifications**, and **Follow up after no response** are on and saved.
- The customer is assigned to the rep who sent the message.
- That rep isn't set to **Don't send follow-ups**.
- The customer isn't in a terminal stage. A terminal stage is one marked **Terminal** on your lead stages page, such as Won, Lost, Spam, or Closed.
- For email, the customer's email address can receive mail. For text, the customer hasn't replied STOP.
- Every variable in the message has a value or a fallback.
