# Void or reopen a repair order

Take a finished repair order back a step, or void one that should never have been opened.

Audience: dealer-managers
Availability: available
Canonical source: https://rooftoprv.com/docs/void-or-reopen-a-repair-order

Managers use these tools to fix a repair order that went wrong. Reopen moves finished work back one step. Void cancels a repair order for good but keeps its record. Some screens call a repair order a work order.

## Before you start

- You need the **Approve repair orders** permission to reopen or void.
- To open a repair order, you also need **Create repair orders**.

## Pick the right fix

| What happened | What to do |
|---|---|
| You just dragged a card to the wrong column | Select **Undo** in the message. See [Track work on the service board](https://rooftoprv.com/docs/track-work-on-the-service-board) |
| A work item or cost is wrong | Select **Edit** on the repair order. See [Approve or reject service work](https://rooftoprv.com/docs/approve-or-reject-service-work) |
| The work was marked complete, invoiced, or closed too soon | Reopen it |
| The repair order shouldn't exist, such as one opened on the wrong RV | Void it |

## Reopen a repair order

You can reopen a repair order that's **Complete**, **Invoiced**, or **Closed**.

1. Open the repair order, on its own page or in the board's side panel.
2. Under **Actions**, select **Reopen**.
   A message says where it will go.
3. Select **Reopen**.
   You see "Reopened to" and the new status. A **Reopened** entry is added to the timeline.

| Status now | Reopen moves it to |
|---|---|
| **Complete** | **In progress** |
| **Invoiced** | **Complete**, and removes the costs it posted to the RV |
| **Closed** | The status it had when it was closed |

A repair order closed after invoicing goes back to **Invoiced** and keeps its costs. Select **Reopen** again to move it to **Complete** and remove them.

To post the costs again after reopening an invoiced repair order, select **Invoice (post costs)**. The costs post once. They aren't added twice.

Reopening to a status before **Complete**, such as **In progress**, also does this:

- A prep step this repair order completed goes back to in progress.
- If the **Due date** is still ahead and a tech is assigned, the tech's morning-of reminder comes back.

A repair order that was closed while **Pending approval or review** goes back to that status, and its approval request returns to approvers' **Inbox**.

When a reopened repair order is marked complete again, no new **Repair completed** alert goes out. That alert is sent once per repair order.

## Void a repair order

> **Warning:** Voiding is final. A voided repair order can't be reopened, edited, or moved. To redo the work, create a new repair order.

You can void a repair order in any status.

1. Open the repair order, on its own page or in the board's side panel.
2. At the top, select the three-dot button (**Work order options**).
3. Select **Void work order**.
4. In **Reason**, say why.
   A reason is required. **Void work order** stays off until you enter one.
5. Select **Void work order**.
   You see the repair order number and "voided".

The repair order shows a **Voided** status and a box that says **This work order is voided**, with your reason, your name, and the date.

## What voiding changes

Voiding keeps the record and changes everything around it:

- The repair order, its number, its work items, and its timeline stay for the record.
- It leaves the service board, **Service items**, **Approvals**, **My work**, and the counts on those pages. Its open items in your team's **Inbox** are cleared.
- Costs it posted to the RV are removed from the listing's **Costs** tab, and the RV's total cost updates.
- Its **Repair due** calendar event and any reminders still waiting to send are canceled.
- A prep step linked to this repair order is unlinked. If the step was in progress, or this repair order completed it, it goes back to not done.
- If it came from an inspection with failed items, that inspection can start a new repair order again. On a closed inspection, the button is **Create work order from findings**, and it needs **Create repair orders**.

Voiding sends no alert of its own. Teammates who turned on the **Service / work orders** row in their **Activity feed** settings get it like any other repair order change. See [Choose your notifications](https://rooftoprv.com/docs/choose-your-notifications).

## Find a voided repair order

- Go to **Service** > **Service items**, open **Status**, and choose **Voided**. Voided repair orders show only when you choose it.
- Or open the RV's listing in **Inventory** and select the **Costs** tab, or the **Unit prep** tab and then **All repair orders and inspections on this unit**. The **Repair orders** list there keeps voided ones, marked **Voided**. That list needs **Create repair orders**.

## Troubleshooting

**I don't see Reopen or the three-dot button**
You need the **Approve repair orders** permission. **Reopen** shows only on a repair order that's **Complete**, **Invoiced**, or **Closed**.

**A closed repair order has no Reopen button**
Some older repair orders were closed before ROOFTOP recorded the status they were closed from. If one of them was never invoiced, it can't be reopened. Create a new repair order instead.

**I can't remove a repair order's cost on the Costs tab**
Costs a repair order posted can only change through the repair order. Edit it, reopen it, or void it.

## Related guides

- [Track work on the service board](https://rooftoprv.com/docs/track-work-on-the-service-board)
- [Approve or reject service work](https://rooftoprv.com/docs/approve-or-reject-service-work)
- [Track what an RV cost](https://rooftoprv.com/docs/track-what-an-rv-cost)
