Integrations
Connect Google Search Console
See how shoppers find you on Google, what they search, and how your clicks change over time.
For: Dealer managers
Connect your Google Search Console property to see how shoppers find you on Google: what they search, which pages and units show up, and how your clicks change over time. You can also compare search traffic before and after your site launched.
On your team, the data is visible to people with the View reports permission, under Reports > Google search.
Before you start
- You need the View settings permission to open Integrations. To reach it from the menu, you also need View team.
- The Search Console section appears for people with View website admin or Manage integrations.
- You need the Manage integrations permission to set up Search Console, check access, import history, or disconnect. Without it, the section shows your property and its status, but not those buttons.
- You need View reports to open the Google search report.
- You need the Edit website configuration permission to set your go-live date.
- You need help from an owner of your property in Search Console. This is often your web vendor.
- The Search Console section must show 1. Set up Search Console. If it says Search Console isn't available, see Troubleshooting.
Set up Search Console
- Go to Admin > Integrations > Google and scroll to Search Console.
- Under 1. Set up Search Console, select Set up Search Console. ROOFTOP creates a Google account for your dealership alone. It takes about a minute, and the section shows each step while it works. You can leave the page.
- When it's done, a green check and Configured appear next to 1. Set up Search Console. The section shows your new account's email under 2. Add this email in Search Console.
You only do this once. If set-up doesn't finish, the section says so and the button changes to Try again.
Add the email in Search Console
- Under 2. Add this email in Search Console, select the copy button next to the email.
- Select the Google Search Console settings link below the email. It opens Users and permissions for your domain in Search Console.
- Select Add user, paste the email, and choose Restricted. Only a property owner can add users. If that isn't you, send the email and the link to the owner, who is often your web vendor.
Enter your property and check access
Search Console has two kinds of property. Use a Domain property when you can.
- A Domain property starts with
sc-domain:, such assc-domain:yourdealership.com. - A URL-prefix property starts with
https://, such ashttps://www.yourdealership.com/.
A URL-prefix property covers one web address. If your address changes at launch, a Domain property keeps your history in one place. Your traffic won't seem to drop just because the address changed.
The property must be for your site's own verified domain, or a part of it. For example, if your domain is yourdealership.com, you can connect sc-domain:yourdealership.com or https://www.yourdealership.com/. If your domain is www.yourdealership.com, connecting sc-domain:yourdealership.com needs ROOFTOP's help.
Connect one property for your site. The page adds every connected property together, so a Domain property and a URL-prefix property for the same site count the same searches twice.
- Under 3. Enter your property, check the property name.
The field starts with your verified domain as a Domain property, such as
sc-domain:yourdealership.com. If your property in Search Console starts withhttps://instead, enter that full address. - Select Check access. The property appears in the section as Checking access, with "Checking with Google. This usually takes a few seconds."
- Wait for the status to change to Connected. The section shows Data back to and the earliest day Google has for the property.
If no property is in the section yet, it says "No property is connected yet."
| Status | What it means |
|---|---|
| Checking access | ROOFTOP is checking with Google. |
| Waiting for access | ROOFTOP hasn't heard back from Google yet. Select Check access next to the property to try again. |
| Can't reach this property | Google hasn't given access to the email in that section. The section says what to do next. |
| Connected | Google gave access. You can import history. Daily updates start after the import finishes. |
| Connected, no search data yet | Google gave access but has no search data for this property. |
| Importing history | Your history import is running. |
| Access lost | Google stopped giving access after the property was connected. |
Import your search history
- On the connected property, select Import history. The section may show Waiting to start first while other imports finish. Then it shows Importing history and a count of days done, then Building the report.
- Wait for the import to finish. You can close the page while it runs. The import keeps going, and the section shows its progress when you come back. When it's done, the section shows Updated through and a date, and Import history goes away.
Google keeps about 16 months of search history, so that's how far back an import goes. ROOFTOP keeps the days it imports, even after Google drops them.
Set your go-live date
Your go-live date is the day your domain moved to this site. It marks the charts and sets the before and after comparison. The date fields appear after your first import finishes.
- Go to Reports > Google search.
- Under Go-live date, choose the date and select Save. Your site has one go-live date. Saving a new one replaces the old one. You can't remove it, only replace it.
To mark another change, such as a new homepage, use Add a chart note. Choose a date, enter a label of up to 60 characters, and select Add note. To remove a note, select the remove button next to it.
If you don't see Go-live date, you don't have the Edit website configuration permission.
Read the Google search report
Go to Reports > Google search. The top of the page says how recent the data is. Google takes about three days to finalize a day.
How shoppers find you on Google. Choose a date range: Last 28 days, Last 3 months, Last 12 months, or Since go-live. Since go-live is available once you set a go-live date. The range sets everything in this section:
- Four tiles show Clicks, Impressions, Click rate, and Average position for the range.
- Brand and non-brand searches splits your clicks. A brand search names your dealership or website, such as your dealership's name. A non-brand search is someone looking for an RV, a service, or a place to buy, who found you on the way. A third tile, Clicks on hidden searches, counts clicks on searches Google doesn't name, so no one can say which kind they were. A weekly chart shows brand and non-brand clicks over your whole history.
- Top searches lists what people typed before they saw your site, with clicks, impressions, click rate, and position. Google hides rare searches, so the list covers only part of your clicks, and the page says how much.
- Top pages lists the pages Google sent people to, including unit and inventory pages, with the same columns. Select a page to open it.
Each list shows 25 rows. Select Show all to see up to 100.
When you save a new go-live date, the Since go-live lists take a few minutes to update. Until then the page says "Updating these lists for your new go-live date."
Before and after launch. Four tiles compare Clicks, Impressions, Click rate, and Average position. Until you set a go-live date, the page shows a reminder instead. Each tile shows the value after go-live, the value before, and the change. Both periods have the same number of days, up to 28. When your data reaches back a year, each tile also shows the same dates last year. RV search is seasonal, so a change between the two periods may not come from the site.
By page type. Four charts show Clicks, Impressions, Click rate, and Average position by week. For position, lower is better, so the chart is flipped and up is good. Each chart has one line per page type: Home, Inventory browse, Unit detail, Content, Site pages, and Other. Your go-live date and chart notes appear as markers.
Google shares page detail for only part of your impressions. So the page type lines can add up to less than your site total, and the page says how much is covered. The before and after tiles use Google's site totals.
Quick wins. This table lists searches from the last 28 days where a small change could bring more visits. The Why column gives one of two reasons:
- Close to the top results: the page ranks on average between positions 5 and 20.
- Ranks well, few clicks: the page ranks better than position 5 on average, but gets less than half the typical click rate of your other searches that rank that well.
The table shows up to 100 searches. Google hides many searches, and the page says what share of your clicks these searches cover.
What happens next
Once a day, ROOFTOP adds the newest finished day and refreshes the last 10 days, because Google keeps adjusting recent days. While it runs, the section shows "Adding Google's latest days." The Google search report updates after each refresh.
If Google stops giving access, the Google search report keeps your history and says "New days have stopped arriving" until access is back.
Disconnect a property
Disconnecting stops daily updates for the property right away, and its data leaves the Google search report. History already imported stays stored, so you can connect it again later. If it was your only property, the page shows "No search data yet."
- On the Search Console section, select Disconnect next to the property.
- In Disconnect this property?, select Disconnect.
To reconnect, enter the property exactly as before under 3. Enter your property and select Check access.
Troubleshooting
"Setting up your Google account didn't finish. Try again, and contact ROOFTOP if it keeps happening." Select Try again. Set-up picks up where it stopped. If the message comes back, contact ROOFTOP.
"Search Console isn't available for your site yet. Contact ROOFTOP to turn it on." ROOFTOP hasn't set up this connection for your dealership. Contact ROOFTOP.
"Your site doesn't have a verified domain yet, so a property can't be connected here. Contact ROOFTOP to connect it." A property can only be connected to a domain ROOFTOP has verified for your site. This often shows before your domain moves to ROOFTOP. Contact ROOFTOP, and ROOFTOP can connect it for you.
"Google hasn't given access to the email above yet. Ask the owner of your property to add it, then check again."
Google doesn't list the email as a user of the property you entered. Ask the owner to add the email shown in that section to that exact property. Check that the name you entered matches Search Console, including sc-domain: or https://. Then select Check access again.
"That property doesn't match a verified domain on this site. Contact ROOFTOP to connect it." The property isn't on your site's verified domain, or it covers more than that domain. To connect a different domain, such as your previous website's, contact ROOFTOP.
"Enter a property like sc-domain:example.com or https://www.example.com/"
The property name isn't in a form ROOFTOP can read. Enter it starting with sc-domain:, https://, or http://.
"Google has no search data for this property yet." Google gave access but has no search data for this property, so Import history doesn't appear. Check that you entered the property your site's traffic is recorded under.
The property shows Access lost Google stopped giving access, often because the email was removed from the property. The section says "Google stopped giving access to this property." Ask the owner to add the email in that section again. Then select Check access next to the property. Once it's Connected, daily updates resume and fill in the missed days. If Import history appears, select it to finish the import.
"Google couldn't find this property. Check that the name matches Search Console exactly." Check the property name in Search Console, then enter it again under 3. Enter your property.
"The last run stopped before it finished. Try again." Select Check access or Import history again. If you see "The last daily update didn't finish. It runs again tomorrow.", there's nothing to do.
"Something went wrong reading from Google. Try again, and contact ROOFTOP if it keeps happening." Select Check access again. If the message comes back, contact ROOFTOP.
"ROOFTOP hasn't finished setting up this connection. Contact ROOFTOP." or "This connection's access was turned off. Contact ROOFTOP to set it up again." Something on ROOFTOP's side needs attention. Contact ROOFTOP.
"Search Console imports are paused for now. Try again later." ROOFTOP has paused imports for now. Try again later. If the message stays, contact ROOFTOP.
"You need the Manage integrations permission to do this." You need the Manage integrations permission to set up Search Console, check access, import history, or disconnect. Ask your dealership's admin.
The Google search report says "No search data yet" This shows until a history import finishes, and after you disconnect your only property. Select Go to integrations to connect a property and import.
"Your go-live date is outside the data we have, so there is nothing to compare yet." The comparison needs data on both sides of your go-live date. Check the date. If your site launched in the last few days, the tiles appear once Google's data reaches that day.